»
Mining Equipment Business
   
»
 
»
Crushing & Screening Equipment Business
 
»
Parts & Logistics
 
»
 
http://www.voltas.com / Partners/Products

Mining & Construction Equipment Division

Partners/Products

Mining Equipment Business

Contact
 Acharya B S acharyabs@voltas.com 9890179129

 


• L-950 to L-2350 (13cu.m to  46cu.m capacity)  Wheel Loaders

L-950 Loader

The P&H LeTourneau-Series L-950 wheel loader is the most
powerful and productive wheel loader in its class. Quick and
agile, the L-950 wheel loader features a 783 kw (1,050 hp)
engine with a 24,494 kg (54,000 Ibs) payload and 13,76 m3
rock bucket in a standard configuration. Powered by the ultra-
efficient Switched Reluctance (SR) Drive system, the L-950
assures high performance with low fuel consumption and
makes it a stand-out performer against all competition. The

 L-950 is ideally sized to load the 75-150 ton rear dump haulers.
   
L-1350 Loader
L-1350 loaders are time-proven, work-hardened machines and were the first LeTourneau Series wheel loaders to utilize SR traction motors, beginning in 2004 and in every L-1350 since. Now, all Generation 2 machines benefit from the SR Generator advantage, LINCS II controls and monitoring, as well as the technological advances found in Generation 2 technology.

Designed to load 200-260 ton haul trucks, this 1193 kW (1600 hp ) wheel loader features a 40,823 kg standard payload with a base rock bucket capacity of 22,94 m3.

Fast cycle times, with easily loaded SAE rated buckets, result in maximum fill with each load creating a superior, productive and fuel-efficient mining machine.
   

L-1850 Loader

L-1850 Generation 2 loader with SR technology is the high-performance workhorse of our P&H LeTourneau-Series fleet. It delivers exceptional productivity and outstanding reliability with low operating costs. The 1491 kw (2000 hp) wheel loader with 54,431 kgs payload and 30,58m3 standard bucket is designed to load 24-360 ton trucks. Work proven in coal and hard-rock mines around the world, the L-1850 sets the benchmark for wheel loader reliability, productivity and fuel efficiency
   

L-2350 Loader

The colossal L-2350 SR electric drive wheel loader is, by far, the world's largest wheel loader, and is designed to canter load the ultra-class 400+ ton trucks with ease. The 1715 kw (2300 hp) L-2350 provides remarkably fast cycle times with outstanding productivity at a fraction of the initial investment cost of large excavators and shovels. This super fuel-efficient wheel loader provides all of the versatility and flexibility that customers have come to expect from P&H LeTourneau-Series wheel loader, while providing a huge 72,574 kgs payload.
 

Dumpers

BELAZ is one of the world's largest manufacturers of heavy-duty industrial vehicles for the mining and metallurgical industries based in Zhodzina. Founded in the year 1948, BELAZ has produced over 120,000 vehicles till date. BELAZ main products are mining dump trucks ranging from 30-450MT .Belaz is the 3rd largest manufacturer of mining dump trucks & the company commands more than 30 market share in Mining Dump trucks globally. Belaz also manufactures & sells state of art wheel loaders, bulldozers, Mining tow trucks, special vehicles for underground projects, Water sprinklers, fuel tankers, slag buggies, heavy-duty carriers for metallurgical plants, airport tow trucks and a whole range of other special-purpose vehicles.

 

Mechanical & Articulated Rear  Dump Trucks   25T to 100 Tons

TR60 Rigid Dump Truck

Specially designed with a rugged frame to provide superior
levels of productivity on the roughest terrain, Terex Rigid Trucks are more than suited to the task. With one of the best reliability records in the industry, and with payloads ranging from 35 tons to 100 tons, you can move more, and faster with Terex.
   

TR70 Rigid Dump Truck

Specially designed with a rugged frame to provide superior
levels of productivity on the roughest terrain, Terex Rigid Trucks are more than suited to the task. With one of the best reliability records in the industry, and with payloads ranging from 35 tons to 100 tons, you can move more, and faster with Terex.
   

TR100 Rigid Dump Truck

Specially designed with a rugged frame to provide superior
levels of productivity on the roughest terrain, Terex Rigid Trucks are more than suited to the task. With one of the best reliability records in the industry, and with payloads ranging from 35 tons to 100 tons, you can move more, and faster with Terex.
   

TA250 Articulated Dump Truck

The new Terex® TA250 is a great performer in all applications. Equipped with a world-class high-capacity cooling system, this proven performer can operate in all conditions from arctic to desert work environments.
   
TA300 Articulated Dump Truck
At home on sites ranging from sand and gravel quarries to coal mines and road construction projects, the TA300 is designed to keep your productivity levels high, fuel consumption low and cycle times short.
   

TA400 Articulated Dump Truck

The combination of high torque, high horsepower, high capacity and the highest top speeds in its class places the TA400 among the class leaders in productivity.
   

Colorado Tire Co. - OTR Bias Ply & Radial   Tyres

Colorado Tire Corporation (CTC) was incorporated in the United States. CTC shot into the limelight in 2007 when it became the first US-based company to design, develop and deliver 63" super-giant OTR tires after Michelin and
Bridgestone.

  • CTC customizes all sizes of OTR tires according to users' conditions and requirements.

  • CTC is able to deliver giant OTR tires by container loads in 30-90 workdays for most sizes.

  • Colorado® OTR tires are fully covered by a 5-year Performance-guaranteed warranty.

  • CTC's OTR tires may be safely retreated more than once.
Today, Colorado Tire Corporation is one of the leading suppliers of full-range OTR tires and the global leader of performance- guaranteed OTR tires.

Colorado® OTR Tires: Better Performance ... GIANT Savings!
   

Breake & Friction

Carlisle Brake & Friction (CBF) is a leading solutions provider of
high-performance and severe-duty brake, clutch and
transmission applications to OEM and aftermarket customers in
the mining, construction, military, agricultural, motorsports,
industrial and aerospace markets. CBF serves over 100
leading original equipment manufacturers (OEM) in 50
countries, making CBF the right choice for your new brake or
friction design, no matter where you are in the world or what your plans and objectives.

   

Total Lubrication Management

Bijur Delimon International is a global leader in the design and manufacture of various fluid dispensing products and systems.


These systems range from simple single-point grease feeders to complex automatic systems that dispense oil or grease to hundreds of lubrication points. Bijur Delimon International services many national and international manufacturers. Principal  industries served include: machine tools, railroad, steel, mining, printing, mobile, wind energy, foods and beverages, textiles material handling, and more.
   

Taiyuan Heavy Industry Co. ,Ltd. (for short TYHI) - Electric Rope excavators
TYHI (TZ) is the largest manufacturer of Electric Rope excavators in China. TYHI is owned by Taiyuan Heavy Machinery Group Co.,
Ltd which is a national enterprise of People Republic of China (PRC). From its first 4 m3 electric rope shovel in the year 1961 to world's largest rope shovel of 75 m3 now operational, TYHI (TZ) has manufactured & sold more than 1300 Electric Rope Shovels in China & other countries .TYHI(TZ) now commands 95 of market share in Electric Rope shovels in China & is rapidly expanding to other markets across the globe.
   

Trolex - gas detectors and environmental monitoring specialists







Sentro 8 Sensor station
Features:

  • Intelligent plug-in sensing modules are available for on-
    board gas detection (e Modules) or remote sensor
    connections ® Modules

  • Up to eight different gases, or a combination of eight remote sensors measuring temperature, pressure, level, vibration, speed, proximity or air velocity, can be monitored
    simultaneously without the need for complex system design

  • All functions can be programmed externally using the heavy-duty waterproof keypad

Sentro 1 Gas Detector

Features

  • Calibrated sensing input modules detect arrangements of gases and can be interchanged in seconds, with data storage of all sensing parameters

  • Clear and concise menu-driven user-calibration
    instructions with detailed sensor diagnostic data

  • Choice of output signal format including RS485 output able to interface directly with intrinsically safe equipment, and capable of being networked to a PC for central control and monitoring

   

UNDERGROUND MINE VENTILATION FAN

MV Fan: PV120 BOOSTER FAN
Model : PV120-8M-1450-DD
Sweep Diameter : 1200 mm
No. of Blades : 8 with Adjustable Angle range from 12.5to 32.5° at 2.5° interval
Fan Speed : 1450 rpm - Direct Drive
Volume Range : 5 to 38 cu. m/Sec
Pressure Range : 90-10 mm WG
Motor Rating : 50 HP Single Stage
 
We supply Auxiliary Fans - Model VF600 to various underground coal and metal mines in India. The details of VF600 are
Sweep Dia : 600 mm
Motor Rating : 15kW/20HP
Air Flow   : 240 - 460 cu.m/sec.
Pressure Range : 40 - 250mm WG
Numerous other models available
   
top